Indexado en
Licencia y uso
Citaciones
Grant support
The ASTEP project has received funding from European Union's Horizon 2020 research programme under grant agreement N degrees 884411. Disclosure: The present publication reflects only the author's views and the European Union are not liable for any use that may be made of the information contained therein. This work has been developed in the frame of the ACES2030-CM project, funded by the Regional Research and Development in Technology Programme 2018 (ref. P2018/EMT-4319).
Análisis de autorías institucional
Barnetche, MagdalenaAutor o CoautorAbbas, RubenAutor o CoautorRovira, AntonioAutor o CoautorScale-up Considerations of the Sundial Rotating Fresnel Solar Collector
Publicado en:Critical Care Medicine. 1 - 2023-01-01 1(), DOI: 10.52825/solarpaces.v1i.779
Autores: Ibarra, Mercedes; Barbero, Ruben; Barnetche, Magdalena; Abbas, Ruben; Rovira, Antonio
Afiliaciones
Resumen
In the frame of the ASTEP project two prototypes of the Sundial collector, together with a Phase Change Material Thermal Energy Storage, will be tested integrated with the industrial processes of two sites. However, the size of the pilot systems will not be optimized for commercialization. The present work considers the scale-up of the concept for one of the pilot industrial sites: a dairy industry located in Greece, and how will the thermal losses of the system must be considered with the increased aperture, thermal storage size and energy output. For the scaling up of the system, the capacities of the Sundial, demand and TES were doubled and multiplied by 10, and the thermal losses of both nominal conditions and annual performance were considered. The results showed that the ratio between the piping heat losses and the total available energy decreased when scaling-up the system both in the nominal and in the annual results. Hence, the heat losses lost importance when scaling up, when more energy was available. These facts should be considered when evaluating the performance of the pilots and feasibility of the concept.
Palabras clave
Indicios de calidad
Impacto bibliométrico. Análisis de la aportación y canal de difusión
El trabajo ha sido publicado en la revista Critical Care Medicine debido a la progresión y el buen impacto que ha alcanzado en los últimos años, según la agencia WoS (JCR), se ha convertido en una referencia en su campo. En el año de publicación del trabajo, 2023, se encontraba en la posición 6/55, consiguiendo con ello situarse como revista Q1 (Primer Cuartil), en la categoría Critical Care Medicine. Destacable, igualmente, el hecho de que la Revista está posicionada por encima del Percentil 90.
Impacto y visibilidad social
Análisis de liderazgo de los autores institucionales
Existe un liderazgo significativo ya que algunos de los autores pertenecientes a la institución aparecen como primer o último firmante, se puede apreciar en el detalle: Último Autor (Rovira De Antonio, Antonio).